We are experienced in Chandelier installation services, chandelier replacement or chandelier repair anywhere in the Greater Toronto area. Chandeliers are the focal point of any room and will add elegance and be the showpiece of the room. Safety during and after installation is the most important piece to the overall process of getting your chandelier up perfectly. Our licensed electricians are expertly trained at even the hardest to reach ceilings and challenging points of suspension. We offer chandelier installation, repair, removal, and the following:
Our Electricians have extensive experience in chandelier installation. We take the necessary precautions to ensure there is no damage done to the drywall or your new lighting fixture.
These fixtures can be exceptionally heavy, not to mention fragile! Also, if you’re removing an old ceiling fan or chandelier, you may run into unexpected issues. As Licensed Electricians, we are prepared for any surprises and trained to install your new fixture safely and up to code.
The weight of your new chandelier will determine how the Installation will be done and the type of electrical box that may be needed as well as any additional support. At times, the electrical ceiling box in your home may not be sufficient or it may be too small to be used with the fixture that you want to install. The Ceiling Box may not be sufficient to hold the weight of the fixture and extra support may be required either in the form of additional support in the ceiling or some other means depending on the weight of the fixture. Additionally, we use the same amount of care in taking down your old fixture as we do installing your new one – in case you plan to relocate it or store it for later use.
The exact process will vary for every service call, depending largely on the size of the fixture or fan and the ceiling itself. We do our best to ensure we make the smallest hole possible in your ceiling drywall and carefully install your new centerpiece for a flawless finish.
Our Licensed Electricians carry out every Chandelier installation in Toronto with care, by installing up to code, with all safety regulations in place.
Frequently Asked Questions we receive about Chandelier installations:
Unfortunately, that’s not always the case. Fixtures over 25lbs require independent support. This is usually in the form of a brace that needs to be installed. This is in addition to the standard octagon ceiling box which is used to attach the fixture.
Replacing an old chandelier with a new small one could be a DIY project if you’re handy enough to do so. However, we recommend that you use a professional electrician to install a chandelier or replace one. There are many underlying things that you may not know until its too late! In many cases, when we get called to DIY jobs we find that people mistakenly use the Ground wire as a Power Wire or a Neutral Wire. Either scenario is wrong and dangerous, which can lead to many other Electrical issues.
Especially with old homes, you never know what’s under the surface. At times, you may not be able to clearly identify correct wires. As licensed Toronto electricians, we can get the job done safely, and fast. We ensure you won’t run into any issues with the installation of any type of size of the fixture.
The weight and size of the fixture, as well as the height of the ceiling. You also need to know if you have sufficient support in the ceiling to hold the new lighting fixture or fan. In addition, you’ll want to make sure the wiring in your home is up to date or in need of repair.
Many people choose to hire professional chandelier installation services due to the weight of the fixtures for new installs and chandelier replacement.